Product Overview and Scope
KYN28A-12 armored mounted AC metal-enclosed switchgear (hereinafter referred to as switchgear) is a gas supply company on the basis of absorbing advanced manufacturing technology, based on its own design and development of new products that can replace all the old type of metal-enclosed switchgear such KYN1-12, JYN2-12 other products. The product has the following distinct advantages:
◆ product's enclosure is completely bolt assembled with high mechanical strength, effectively ensure the orderly and beautiful products, doors using spray coating, has a strong impact
And corrosion resistance. Product housing has IP4X level of protection. (Can be changed according to customer needs iron).
◆ The product can be equipped with ABB switch production company VD4 vacuum circuit breaker, C3 series of fixed load switch, but also can be configured to a variety of domestic series vacuum circuit breaker (eg VSIVHI, VK, ZN28), to replace similar foreign products.
◆ Whether it is the selection of the circuit breaker, which bare conductor can ensure air insulation distance is greater than 125mm, composite insulation is greater than 60mm. The unique advantages of its circuit breakers have a long life, low maintenance, small size
KYN28A-12 armored mounted metal-enclosed switchgear is suitable for three-phase AC 50Hz grid 3.6-12kV as receiving and distributing power, and circuit implementation of control, monitoring and protection purposes. Can be used for single-bus, single busbar system or dual-bus system. Switching equipment meets IEC298 "rated voltages above 1kV and below 52kV AC metal-enclosed switchgear and control equipment", IEC694 "Temple-voltage switchgear and control equipment sharing clause" of GB3906 (3-35kV AC metal-enclosed switchgear "and DIA04" households High Voltage Switchgear order condition in the exchange, "the German DIN.VDE0670" IkV above the rated voltage AC switch equipment "and other standards. and has a complete and reliable function to prevent misuse.
Model and meaning
Normal conditions of use
◆ ambient air temperature: up to + 40 ℃, the lower limit of -10 ℃;
◆ Relative humidity: daily average of not more than 95%, on average less than 90%;
◆ Altitude: not exceed 1000m;
◆ earthquake intensity does not exceed 8 degrees;
◆ No fire, explosion, serious pollution, chemical corrosion and severe vibration. When conditions outside the above range, the user should be allowed to negotiate with the company to determine the scope and technical measures applied technology.
Technical parameters
◆ Switching Equipment Specifications
◆ VD4, VS1-12 vacuum circuit breaker technology parameters
◆ VD4, VS1-12 mechanical properties of the vacuum breaker
When the circuit breaker is used to control 3-10kV motor, if the starting current is less than 600A, must be added to the metal MOA, the specific requirements for consultation with our company by the user; when the circuit breaker for breaking capacitors, capacitor banks rated current breaker should be greater than 80% of the rated current.
◆ operating agency technical parameters
◆ ZN □ -12 (VHI) vacuum circuit breaker main technical parameters
